22596 138th Street |
APRIL SPECIALS!
4 Wheeler Tires (American Racer)
American Racer G-60 Tires - $90 plus
tax
|
Light weight mini starters - Great for Hobby Stocks 168 tooth
only - Angle bolt pattern,
3 Housepower, new not rebuilt $100
Mini Hy-Torque Gear reduction starter 153 or 168 tooth, straight bolt pattern, New not rebuilt $100
Give Dave a call to Setup your gears, Straighten Rear-end Housings and
build Outlaw Carburetors.
All Prices are Exchange.................
Powerglides
Powerglide Rebuilds | $160 - Plus hard parts if needed |
Powerglide Ball Valve Type | $525 |
Powerglide Hydraulic Push Start Servo | $625 |
Powerglide with Internal Bleed Off | $550 |
Powerglide for Functional Converter | $550.00 |
Light Clutch Drum & Light Ring gear Added | $150 |
Core Charge | $150 |
Ernie Glide Rebuilds | Call |
Ernie Transmissions | Call |
Bennett Powerglides can be purchased at RaceMart in Memphis Mo.
Rear Ends
Rear End Straitening | $50 to $75 |
Ford 9" Race Ready 3rd Member Assembly with mini Spools |
$380 |
Drop Shipping Continental US add: | $20 |
Standard Light Weight Spools | $90 |
Ultra Light Weight Spools | $100 |
Ratios over 6.50 add: | $60 |
Solid Pinion Spacer add: | $22 |
Moly Cross Pin for Mini Spools | $15 |
Lightened Ping Gear | $90 |
Ratio Available: 350, 370, 389, 411, 430, 456, 471, 486, 500, 514, 537, 543, 567, 600, 620, 633, 650, 666, 683, 700, 713, 733 |
9" Race Ready Gears
Shipped to your door in a plastic gear tote up to 6.50 choice of 28 or 31 spine,
any yoke mini spool $400
Need Ultra light full spool just $500 - for other options call Dave
Complete Floaters - Floater Rear Ends - Stock Car
Ready
58" 60" or 62" Centered, 5x5 Ace Hubs Rotors, Metric Mounts, Metric
calipers mounts 28 or 31 spine solid axles Shipped to your door - $800
Need 4-3/4 hubs add: $30
Need 4-1/2 hubs add $100
Hobby Stock Rear Ends With Metric Mounts
Rear Ends 58" 60" 62" -
28 or 31 Spline Superior Axles with bearing retainers and studs 4-1/2
4-3/4 or 5 bolt patterns no brakes shipped to your door $800
Rear Ends 58" 60" 62"
9" Ford Non-Floater Rear End Housing for GM Metric Chassis with brackets New Tubes and New Bearing Ends | $350 |
New Harden Axles all bolt patterns with Bearings, Studs and Plates Each | $225 |
Floaters Housing without Brackets | $300 |
.120 Moly Tubes (Saves 5lbs.) add: | $60 |
GM Metric Brackets add: | $90 |
Complete Floaters | Call! |